x
Floor-standing ultrasonic spray coater
This instrument is specially developed for the preparation of fuel cell membrane electrodes and is suitable for spraying equipment in enterprise research and pilot production. The equipment adopts high-quality ultrasonic nozzle, which can carry out uniform and efficient film spraying and spray pyrolysis, and the film thickness can reach tens of nanometers.
咨询定制热线：155-0165-5918
-技术特点-
·Using high-quality ultrasonic nozzles, the slurry is evenly atomized and has a high utilization rate;
·Equipped with laser positioning function, accurately locate the spraying position;
·In the injection pump system, there is an anti settling device that can effectively prevent the slurry from settling.
-性能参数-
| 模块名称 | 项目 | 值 | 备注 |
| 喷涂轨迹控制 | 运动轴 | 3轴 | X,Y,Z |
| 喷涂最大面积 | 600×600mm | 有效面积（可定制） | |
| 喷涂尺寸精度 | <0.1mm | ||
| 运动最大速度 | 9000mm | 可实时调整 | |
| 控制软件 | LC-CCM | 在线式 | |
超声喷雾系统 | 谐振频率 | 45kHz | |
| 喷嘴材质 | 钛合金芯层 | 耐腐蚀 | |
| 喷嘴雾化粒径 | 40μm | 以纯水为例，具体与喷涂浆料粘度相关 | |
| 喷嘴雾化半径 | 5~20mm | 具体与喷嘴高度有关 | |
| 进料系统 | 管路内径 | 1mm | zui大程度的节约浆料 |
| 管路材质 | PTFE | 高透明，方便观察浆料 | |
| 接头材质 | 316 L不锈钢 | 耐腐蚀 | |
| 流量设定范围 | 0.1~10ml/min | 流速可调 | |
| 流量设定精度 | ≤±1.5% | ||
| zui大喷涂量(每次) | 100ml | 注射泵100ML | |
| 真空加热吸台 | 加热控温范围 | 室温~150℃ | 有温度保护，防止过度升温 |
| 真空吸盘材质 | 铝合金 | ||
| 真空吸盘尺寸 | 650*650mm | 可定制 | |
| 水平调节功能 | 有 | 可手动调节 | |
| 真空泵 | 供电电源 | 220V,50Hz | 需外接电源 |
| 额定功率 | 160W | ||
| 抽气速度 | 20L/min | ||
| 极限压力 | ≥0.08MPa | 相当于200mbar | |
| 噪音 | <50DB |
