This spraying device uses the principle of ultrasonic atomization, achieving a slurry utilization rate of over 95%. It provides high uniformity in slurry coating, ensuring stability and reproducibility during sample preparation, making it ideal for the development of products such as fuel cell membrane electrodes, catalysts, and perovskite thin-film cells.
The main components of this spraying device include a precision motion control module, ultrasonic spraying module, precision injection pump, and a vacuum heating platform. It features a desktop design with a compact and rational structure, and the overall size is comparable to that of a standard printer. It is convenient to place in fume hoods, laboratory benches, and similar settings, making it highly suitable for use in universities and research institutions.
咨询定制热线：155-0165-5918
· Effective spraying area … … … … 270mm x 170mm
· Spraying speed … … … … … … 0-9000mm/min
· Spray volume … … … … … … … continuous operation possible
· Repeat positioning accuracy … … … ±0.02mm
· Flow setting range … … … … 0.01-5 ±1.5% ml/min
· Medium viscosity … … … … … … <50mm²/s
· Heating temperature from room temperature to … … … 120 ±1°C
· Equipment dimensions … … … … … … 800mm x 400mm x 480mm
| 模块名称 | 项目 | 值 | 备注 |
| 喷涂轨迹控制 | 运动轴 | 3轴 | X,Y,Z |
| 喷涂zui大面积 | 270×170mm | 最大有效面积可到300*200mm | |
| 喷涂尺寸精度 | <0.1mm | ||
| 运动zui大速度 | 9000mm | 可实时调整 | |
| 控制软件 | LC-CCM | 支持solidworks,CAD通用格式 | |
| 超声喷雾系统 | 谐振频率 | 45kHz | |
| 喷嘴材质 | 钛合金芯层 | 耐腐蚀 | |
| 喷嘴雾化粒径 | 40μm | ||
| 喷嘴雾化半径 | 5~20mm | 具体与喷嘴高度有关 | |
| 进料系统 (注射泵) | 管路内径 | 1mm | zui大程度的节约浆料 |
| 管路材质 | PTFE | 高透明，方便观察浆料 | |
| 接头材质 | 316 L不锈钢 | 耐腐蚀 | |
| 流量设定范围 | 0.01~99ml/min | ||
| 流量设定精度 | ≤±1.5% | ||
| zui大喷涂量(每次) | 50ml | 0~50ml可调 | |
| 真空加热吸台 | 加热控温范围 | 室温~120℃ | 有温度保护，防止过度升温 |
| 真空吸盘材质 | 铝合金 | ||
| 真空吸盘尺寸 | 320*240mm | 可定制 | |
| 水平调节功能 | 有 | 可手动调节 | |
| 真空泵 | 供电电源 | 220V,50Hz | 需外接电源 |
| 额定功率 | 160W | ||
| 抽气速度 | 20L/min | ||
| 极限压力 | ≥0.08MPa | 相当于200mbar | |
| 噪音 | <50DB | ||
| 磁力搅拌系统 | 搅拌旋转 | 定制 | 选配 |
| 储料杯 | 储料搅拌 | 定制 | 选配 |
